# This is the Pod-Bot Config File (for HL Counter-Strike)

# тэг команды setinfo для доступа в pb menu
# пример доступа setinfo _adminpb "mjbot"
pb_passwordkey "_adminpb"

# сам пароль для доступа в под-бот меню
# bind "=" "pb menu"
pb_password "mjbot"

# This sets the Waypoint Folder (in the POD-Bot Directory)
# for loading/saving waypoints. Don't use a trailing backslash or spaces.
# This doesn't work for the first game you create (it has to start from
# wptdefault). But when creating for the second time (or loading with newmap)
# this directory will be used. Default is wptdefault.
pb_wptfolder wptdefault

# Set the value to 1 to turn on welcome messages at start the game. 
# Default is 0.
pb_welcomemsgs 0

# Use this to turn on/off the Speech Synthesis <1|0>. Default is 0.
pb_usespeech 0

# These 2 setings below support a minimum and maximum number 
# of bots running on a server. They are ONLY LIMITS for the function 
# pb fillserver and pb removebots. The actual amount of bots might be 
# between those limits (it rely for example on how many times pb add 
# command has been used).
# Bots may be added to the server until the total number of players 
# (bots and humans) reaches the pb_maxbots value.  Each time a new player
# joins the server, a bot will be kicked from the server unless there are 
# only pb_minbots number of bots currently on the server. After players 
# disconnect from the server, bots will be automatically added back to 
# the server until the total number of players (humans and bots) reaches 
# pb_maxbots again. pb_maxbots should be AT LEAST one less than 
# the maxplayers value (otherwise no one will be able to join the server).
# You can stop this function (auto add/kick bots for entering/leaving 
# humans)) by writing pb_maxbots = 0.
# Ths function is also not working in the case if pb_bot_quota_match 
# is grater than 0 (in that case amount of bots follow the number
# humans * pb_bot_quota_match - of course in the min/maxbots limit).
# Default value for pb_bot_quota_match is 0.
# Default values for pb_minbots and pb_maxbots are 0 and 16.
pb_minbots 0
pb_maxbots 12
pb_bot_quota_match 0

# за какую команду по дефолту будут заходить боты
# Argument values: "ANY", "T", "CT". Default is "ANY".
pb_bot_join_team "ANY"

# Changing the setting below forces bots using the specified skin - the same
# for all bots from one team - regardless of pb add or pb fillserver 
# parameters.
# Useful if You want to have always bots in one team with the same skin.
# Argument values: 1,2,3,4 - they are forced skins, 5 - default - no forcing
pb_skin 5

# These Settings below specify the Rate (in Seconds) of updating
# some of the Bot Checks. If you've got a slow computer you could
# try changing these to higher values to get some performance back.
# NOTE: This seriously affects the Bots Perception. If you have a
# fast computer you might try lowering them to get even better
# playing results. Default for pb_timer_sound is 0.5, for pb_timer_pickup
# is 0.3 and for pb_timer_grenade is 0.5.
pb_timer_sound 0.5
pb_timer_pickup 0.3
pb_timer_grenade 0.5

# Set this to 0 to disallow Bot Logo Spraying
pb_spray 0

# Set this to 1 to switch on the Free For All mode
# (The bots will also kill their teammates)
pb_ffa 0

# This Variable specifies if Bots are allowed to shoot through Walls
# if they saw an enemy or if they heard someone on the other Side of
# a Wall (additional Settings are specified in "botskill.cfg"). <1|0>.
# Default is 1.
pb_shootthruwalls 1

# This value sets the maximum number of Bots of one team to follow the same
# user(when Radio Command "Follow Me" is used). Default is 5.
pb_numfollowuser 5

# Sets the minimum possible skill level for a bot added with a random skill.
# Default is 95.
pb_minbotskill 60

# Sets the maximum possible skill level for a bot added with a random skill.
# Default is 100.
pb_maxbotskill 100

# This value sets the maximum number of weapons Bots are allowed to
# pickup during one round. Default is 10.
pb_maxweaponpickup 10

# Set the below value to delay bots re-join after new map start. 
# Default is 10.
pb_mapstartbotdelay 10

# Set the below value to 1 to enable auto kill bots if all human players
# are dead already. <0|1>. Default is 0.
pb_autokill 0

# Set the below value to delay (in seconds) autokill bots if 
# autokill function is enabled (above). Default is 45.
pb_autokilldelay 5

# Set the below value to delay in seconds the bot may stay camping in one 
# place before going somewhere else. Default is 30.
pb_maxcamptime 30

# Turns on/off Jason Mode! Meaning Bots don't buy
# weapons and only use the knife for combat! Use this for
#	much fun with e.a. cs_estate or cs_office. <1|0>
# Default is 0.
pb_jasonmode 0

# This  value sets the skilldisplay and/or the prefix before bot's name.
# 0 - no skilldisplay and no [POD] prefix before the name;
# 1 - both - skilldisplay and [POD] prefix before the name are added;
# 2 - only the [POD] prefix before the name is added;
# 3 - only the skill (for example (100) ) sufix after the name is added;
# The prefixes are: for aggresive bots the prefix is [P*D], 
# for normal ones - [POD] and for deffensive ones is [P0D] 
# (just zero instead "o" between "P" and "D").
# Default is 1.
pb_detailnames 0

# The setting below specifies the danger factor with which the bots
# will weighten any waypoint where they have been killed in the past,
# in order to avoid it later. The higher the value, the more the bot
# will care about these waypoints and pick other routes instead.
# Progression is logarithmic. Warning: higher values require more CPU.
# Default is 2000.
pb_dangerfactor 2000

# Switches to on/off Botchatting. <0|1>. Default is 1.
pb_chat 0

# Switches to on/off (1/0) showing on the scoreboard the string "BOT" 
# as a ping or show a fake ping for bots (2). <0|1|2>. Default is 2.
pb_latencybot 2

# Switches to on/off radio command usage for bots <0|1>. Default is 1.
pb_radio 0

# pb_aim_type 1-4 (default 4)
# 1 = inhuman turns
# 2 = constant angle velocity
# 3 = botaim1
# 4 = botaim2
pb_aim_type 4

# VERTICAL (up/down) spring stiffness of the aiming system. This value affects
# the quickness of the crosshair movement, as well as the frequency of
# the resulting oscillations. (default: 13.0)
pb_aim_spring_stiffness_x 13.0

# HORIZONTAL (left/right) spring stiffness of the aiming system. This value 
# affects the quickness of the crosshair movement, as well as the frequency of
# the resulting oscillations. (default: 13.0)
pb_aim_spring_stiffness_y	13.0

# VERTICAL (up/down) damping coefficient of the aiming system. This value also
# affects the quickness of the crosshair movement, and the amplitude of
# the resulting oscillations. (default: 0.22)
pb_aim_damper_coefficient_x 0.22

# HORIZONTAL (left/right) damping coefficient of the aiming system. This value
# also affects the quickness of the crosshair movement, and the amplitude of
# the resulting oscillations. (default: 0.22)
pb_aim_damper_coefficient_y 0.22

# VERTICAL (up/down) error margin of the aiming system. This value affects how
# far (in game length units) the bot will allow its crosshair to derivate from
# the ideal direction when not targeting any player in particular.
# (default: 2.0)
pb_aim_deviation_x 2.0

# HORIZONTAL (left/right) error margin of the aiming system. This value affects
# how far (in game length units) the bot will allow its crosshair to derivate
# from the ideal direction when not targeting any player in particular.
# (default: 1.0)
pb_aim_deviation_y 1.0

# Perpendicular influence of the vertical axis on a HORIZONTAL movement. This 
# value affects how much (in fraction of 1) the bot will be disturbed when
# moving its crosshair on an axis by the inherent movement on the other axis.
# (default: 0.25)
pb_aim_influence_x_on_y 0.25

# Perpendicular influence of the horizontal axis on a VERTICAL movement. This
# value affects how much (in fraction of 1) the bot will be disturbed when 
# moving its crosshair on an axis by the inherent movement on the other axis.
# (default: 0.17)
pb_aim_influence_y_on_x 0.17

# Maximal value in seconds after which the aiming system will re-evaluate its
# ideal direction. This affects how often a bot will attempt to correct an
# imprecise crosshair placement by moving the crosshair inside the error
# margin bounds defined by the botaim_deviation CVARs. (default: 1.2)
pb_aim_offset_delay 1.2

# Fraction of the full speed the aiming system will adopt as speed when aiming
# at nothing in particular. This affects how slow the bot will move its
# crosshair when targeting nobody, relatively to its full speed capacity.
# (default: 0.5)
pb_aim_notarget_slowdown_ratio 0.5

# Fraction of the estimated target's velocity the aiming system will rely on
# when aiming at a moving target. This affects how well the bot will be able
# to track moving targets on the fly, and whether it will have a tendancy 
# to aim ahead of it or behind it. (default: 2.2)
pb_aim_target_anticipation_ratio 2.2

# Weapons, equipment and ammo restriction (for buying)
# bit numbers meaning - the left one is the 0 in that string cvar
# Pistols restriction
# 0 - KNIFE
# 1 - USP
# 2 - GLOCK18
# 3 - DEAGLE
# 4 - P228
# 5 - ELITE
# 6 - FIVESEVEN
# Shotgun restrictions
# 7 - M3
# 8 - XM1014
# SMG restrictions
# 9 - MP5NAVY
# 10 - TMP
# 11 - P90
# 12 - MAC10
# 13 - UMP45
# Rifles restrictions
# 14 - AK47
# 15 - SG552
# 16 - M4A1
# 17 - GALIL
# 18 - FAMAS
# 19 - AUG
# 20 - SCOUT
# 21 - AWP
# 22 - G3SG1
# 23 - SG550
# Machine Gun restriction
# 24 - M249
# Shield restriction
# 25 - SHIELD
pb_restrweapons "00001111101111010001101111"

# 0 - vest
# 1 - vest and helmet
# 2 - flashbang
# 3 - he grenade
# 4 - smoke grenade
# 5 - defuser
# 6 - night vision googles
# 7 - primary ammo
# 8 - secondary ammo
pb_restrequipammo "110000000"

# These lines below are adding automatically the bots to the server when
# the new game is created on the listenserver or the dedicated server
# is starting.
# As many such lines like "pb add" is here as many bots will be added 
# to the server (unless You will not exceed pb_maxbots setting).
pb add 20
pb add 60
pb add 40
pb add 90
pb add 50
pb add 100
pb add 50
pb add 100
pb add 40
pb add 90
pb add 80
pb add 30

# To prevent put for example 16 lines like above ones, to just fill up 
# the server with pb_maxbots, just remove the comment from the line below.
# pb fillserver 100

# The line below binds the User Menu to the "=" key. Of course you
# can bind this to any key you like. 
bind "=" "pb menu"
